Share
All Products ➞ Dymaxion ➞ Diamond Hole Saws and Core Drills ➞ Diamond Core Bits for Polymer Concrete Pits, Granite and Porcelain ➞ Diamond Core Bits for Polymer Concrete Pits, Granite and Porcelain
Diamond Core Drill For Granite Porcelain and Polymer Concrete 48mm Dia
Part Number: | CGS48-65 |
Brand: | Dymaxion |
Barcode: | 9333716002374 |
Pack Qty: | 1 |
Pack Type: | Single |
Packaging: | Telepak |
Diameter (mm): | 48.0 |
Thread: | 1/2" BSP Female |
Description: | 12mm HEX Shank Mandrel with Taper TCT Pilot Drill and wedge key. |
Note: | Internal depth 50mm. |
About this item:
- Can be used for coring polymer concrete and plastic/glass cable joining pits. Avoid overheating by quenching in water.
- Suitable for cutting hard porcelain and granite bench tops. Ensure plenty of water to cool and remove waste from the cut.
- Diamond core drills and hole saws require the use of proper lubrication, correct drill speed and proper pressure.
- Drilling methods and techniques vary significantly depending upon the material being drilled.
- To achive optimum cutting performance and maximum core drill life use a slow to very slow drill speed, low drill pressure, and plenty of water for lubrication.
- Variable speed drills work best since the correct speed can be selected.
- Diamond core drills only drill out a portion of the resulting hole so they drill much faster than conventional blunt nose drills.
- The life of any type of diamond drill depends upon the hardness, abrasiveness and thickness of the material being drilled and the specific drilling techniques used.
- Using diamond core drills in hard materials is not difficult, however drilling the hole takes time.
- You should consider that they aren't "drilling" a hole - they are "grinding" a hole.