Share
All Products ➞ Dymaxion ➞ Diamond Hole Saws and Core Drills ➞ Diamond Core Bits Multi-material inc. Concrete ➞ Diamond Core Bits Multi-material inc. Concrete
Diamond Core Drill for Concrete/Brick 35mm x 220mm with 1/2" BSP Fitting
Part Number: | CCSB35-220 |
Brand: | Dymaxion |
Barcode: | 9333716003845 |
Pack Qty: | 1 |
Pack Type: | Single |
Packaging: | Telepak |
Diameter (mm): | 35 |
OAL (mm): | 220 |
Segment Height (mm): | 12 |
Thread: | 1/2" BSP female |
Ideal For: | Suitable for cutting concrete, brick, compressed fibre cement sheet, granite and other masonry building materials. |
Description: | Maximum coring depth 190mm |
Note: | Wall ties can damage diamond segments. Check for obstructions and remove. |
About this item:
- Suitable for cutting concrete, brick, compressed fibre cement sheet, granite and other masonry building materials.
- Utilising adaptor AUB100 these core drills can be used with core drilling machines.
- Diamond core drills and hole saws require the use of proper lubrication, correct drill speed and proper pressure.
- Drilling methods and techniques vary significantly depending upon the material being drilled.
- To achive optimum cutting performance and maximum core drill life use a slow to very slow drill speed, low drill pressure, and plenty of water for lubrication.
- Variable speed drills work best since the correct speed can be selected.
- Diamond core drills only drill out a portion of the resulting hole so they drill much faster than conventional blunt nose drills.
- The life of any type of diamond drill depends upon the hardness, abrasiveness and thickness of the material being drilled and the specific drilling techniques used.
- Using diamond core drills in hard materials is not difficult, however drilling the hole takes time.
- You should consider that they aren't "drilling" a hole - they are "grinding" a hole.
- DO NOT USE HAMMER ACTION.