Share
All Products ➞ Bordo ➞ Burrs ➞ Express Cut ➞ Ball ➞ Long 1/4" Shank Dia.
1/4" SD-1 Ball Shaped 1/4 x 6" Shank Burr
Part Number: | 6402-95259 |
Brand: | Bordo |
Barcode: | 9326518019671 |
Pack Qty: | 1 |
Flute Length (inch): | -0 |
Head Diameter (inch): | 1/4 |
Overall Length (inch): | 6-13/64 |
Shank (inch): | 1/4 |
Style: | SD-1L6 |
About this item:
- 1/4" SD-1 Ball Shaped 1/4 x 6" Shank Burr
- SD-1 Express cut tungsten carbide burr.
- 6.35mm x 150mm (1/4" x 6") Extended Shank.
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
Alternative Products
Selected Product | Alternative | |
---|---|---|
Part Number: | 6402-95259 | 8020-SD1 |
Title: | 1/4" SD-1 Ball Shaped 1/4 x 6" Shank Burr | 1/4" SD-1 Ball Burr - Saber |
Barcode | 9326518019671 | 9326518160502 |
Brand | Bordo | Saber |
Flute Length (inch) | -0 | |
Head Diameter (inch) | 1/4 | 1/4 |
Overall Length (inch) | 6-13/64 | 2 |
Shank (inch) | 1/4 | 1/4 |
Pack Qty | 1 | 1 |
Style | SD-1L6 | SD-1 |