Share
All Products ➞ Bordo ➞ Burrs ➞ Express Cut ➞ Pointed Cone ➞ 1/4" Shank Dia.
5/8" SM-6 Pointed cone 1/4" Shank Burr
| Part Number: | 6400-95156 |
| Brand: | Bordo |
| Barcode: | 9326518009740 |
| Pack Qty: | 1 |
| Angle (degrees): | 31ï¾° |
| Flute Length (inch): | 1 |
| Head Diameter (inch): | 5/8 |
| Overall Length (inch): | 2-7/8 |
| Shank (inch): | 1/4 |
| Style: | SM-6 |
About this item:
- 5/8" SM-6 Pointed cone 1/4" Shank Burr
- SM-6 Express cut tungsten carbide burr.
- 6.35mm (1/4") Shank.
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.