Share
Link:
Copy Link | Email Link
8 Pce #11 Express Cut Burr Set
| Part Number: | 6400-S11 |
| Brand: | Bordo |
| Barcode: | 9326518011064 |
| Shank (inch): | 1/4" |
| Number of Pieces: | 8 |
| Surface Finish: | Bright |
| Material: | Tungsten Carbide |
Components:
| Part Number | Quantity | |
|---|
| 6400-95042 | 1 | |
| 6400-95065 | 1 | |
| 6400-95201 | 1 | |
| 6400-95161 | 1 | |
| 6400-95092 | 1 | |
| 6400-95117 | 1 | |
| 6400-95179 | 1 | |
| 6400-95143 | 1 | |
About this item:
- 8 Piece #11 3/8" Diameter Express Cut Burr Set
- 6.35mm (1/4") Shank.
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
