Share
All Products ➞ Bordo ➞ Burrs ➞ INOX for Stainless Steel ➞ 1/4" Shank Dia.
1/2" SC-5 INOX Cylindrical with Ball 1/4" Shank Burr
| Part Number: | 6403-951225 |
| Brand: | Bordo |
| Barcode: | 9349009022691 |
| Pack Qty: | 1 |
| Flute Length (inch): | 1 |
| Head Diameter (inch): | 1/2 |
| Overall Length (inch): | 2-3/4 |
| Shank (inch): | 1/4 |
| Style: | SC-5 IN |
About this item:
- 1/2" SC-5 INOX Cylindrical with Ball 1/4" Shank Burr
- SC-5 INOX tungsten carbide burr.
- Optimised geometry for rapid stock removal when machining stainless steel.
- Bordo INOX burrs have a unique cutting geometry that reduces heat build up at the cutting edge of the workpiece.
- In excess of 35% more stock removal compared to conventional burr geometry.
- Superior stock removal on Ferritic, Austenitic and Martensitic based materials.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.