Share
All Products ➞ Bordo ➞ Burrs ➞ Non-Ferrous Cut ➞ Included Angle ➞ 1/4" Shank Dia.
3/8" SL-3 14 Deg. Included Angle 1/4" Shank Burr Non Ferrous
Part Number: | 6401-95298 |
Brand: | Bordo |
Barcode: | 9326518010982 |
Pack Qty: | 1 |
Angle (degrees): | 14ᄎ |
Flute Length (inch): | 1-1/16 |
Head Diameter (inch): | 3/8 |
OAL (inch): | 2-15/16 |
Shank (inch): | 1/4 |
Style: | SL-3NF |
About this item:
- 3/8" SL-3 14 Deg. Included Angle 1/4" Shank Burr Non Ferrous
- SL-3 Non-ferrous cut tungsten carbide burr.
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.