Share
All Products ➞ Bordo ➞ Burrs ➞ Xtreme Performance Burrs ➞ 1/4" Shank Xtreme Burrs
Bordo Xtreme Burr 3/8 SC-3 Cylindrical Ball Nose 1/4 Shank Burr
| Part Number: | 6405-90065 |
| Brand: | Bordo |
| Sub Brand: | Xtreme |
| Barcode: | 9326518181835 |
| Pack Type: | Twist Pack |
| Packaging: | Hang Sell |
| Diameter (inch): | 3/8 |
| Shank (inch): | 1/4 |
| Style: | SC-3 |
About this item:
- 3/8" SC-3 Cylindrical Ball Nose 1/4" Shank Burr
- Xtreme Performance Tungsten Carbide Burr
- 6.35mm (1/4") Shank.
- Bordo Xtreme burs remove up to 75% more stock on Mild Steel during the first 5 minutes of grinding when tested against other leading premium-quality double cut burs.
- Cumulative stock removal on Stainless Steel over 15 minutes is over 50% more than Express Cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.