Share
All Products ➞ Bordo ➞ Drills ➞ Jobber ➞ Cobalt HSS-Co5 ➞ Metric Carded
2mm HSS Cobalt Jobber Drill - 2Pk Clam
| Part Number: | 2011-2.00S |
| Brand: | Bordo |
| Sub Brand: | Cobalt Tough |
| Barcode: | 9326518035930 |
| Pack Qty: | 2 |
| Feed per revolution mm: | 0.08 |
| Spindle Speed Aluminium/Brass RPM: | 11657 |
| Spindle Speed Cast Iron RPM: | 4586 |
| Spindle Speed Free Cutting Steel RPM: | 8217 |
| Spindle Speed Malleable Iron RPM: | 5160 |
| Spindle Speed Med. Carbon Steel RPM: | 5733 |
| Spindle Speed Stainless Steel RPM: | 2293 |
| Spindle Speed Tool Steel RPM: | 3440 |
| Spindle Speed Wood/Plastic RPM: | 17390 |
| Diameter (mm): | 2 |
| Flute Length (mm): | 24 |
| Overall Length (mm): | 49 |
About this item:
- 2mm HSS Cobalt Twist Drill - 2Pk Clam
- Bordo Metric Cobalt Tough HSS-Co5 Twist Drills.
- DIN338
- 135º Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135º point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.