Share
All Products ➞ Bordo ➞ Drills ➞ Jobber ➞ Cobalt HSS-Co5 ➞ Metric Carded
2.5mm HSS Cobalt Jobber Drill - 2Pk Clam
| Part Number: | 2011-2.50S |
| Brand: | Bordo |
| Sub Brand: | Cobalt Tough |
| Barcode: | 9326518035947 |
| Pack Qty: | 2 |
| Feed per revolution mm: | 0.09 |
| Spindle Speed Aluminium/Brass RPM: | 9326 |
| Spindle Speed Cast Iron RPM: | 3669 |
| Spindle Speed Free Cutting Steel RPM: | 6574 |
| Spindle Speed Malleable Iron RPM: | 4128 |
| Spindle Speed Med. Carbon Steel RPM: | 4586 |
| Spindle Speed Stainless Steel RPM: | 1835 |
| Spindle Speed Tool Steel RPM: | 2752 |
| Spindle Speed Wood/Plastic RPM: | 13912 |
| Diameter (mm): | 2.5 |
| Flute Length (mm): | 30 |
| Overall Length (mm): | 57 |
About this item:
- 2.5mm HSS Cobalt Twist Drill - 2Pk Clam
- Bordo Metric Cobalt Tough HSS-Co5 Twist Drills.
- DIN338
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.