Share
All Products ➞ Bordo ➞ Drills ➞ Jobber ➞ LEFT HAND Cobalt HSS-Co5
19/64" HSS Cobalt LEFT HAND Drill
| Part Number: | 2005-19/64 |
| Brand: | Bordo |
| Barcode: | 9326518003892 |
| Pack Qty: | 5 |
| Feed per revolution mm: | 0.2 |
| Spindle Speed Aluminium/Brass RPM: | 3092 |
| Spindle Speed Cast Iron RPM: | 1217 |
| Spindle Speed Free Cutting Steel RPM: | 2180 |
| Spindle Speed Malleable Iron RPM: | 1369 |
| Spindle Speed Med. Carbon Steel RPM: | 1521 |
| Spindle Speed Stainless Steel RPM: | 608 |
| Spindle Speed Tool Steel RPM: | 912 |
| Spindle Speed Wood/Plastic RPM: | 4613 |
| Diameter (inch): | 19/64 |
| Diameter (mm): | 7.54 |
| Flute Length (mm): | 51 |
| Overall Length (mm): | 90 |
About this item:
- 19/64" HSS Cobalt LEFT HAND Drill
- Bordo Fractional Left Hand Cobalt Tough HSS-Co5 Twist Drills.
- 135° Split Point (crankshaft point)
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Left Hand Twist drills are ideal for use with screw extractors to remove broken bolts and screws.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.