Share
All Products ➞ Bordo ➞ Hole Saws ➞ Screw (Chassis) Punches ➞ Chassis Punch Clam Shell
35mm Chrome Alloy Screw (Chassis) Punch
| Part Number: | 7086-35.0 |
| Brand: | Bordo |
| Barcode: | 9326518102533 |
| Pack Qty: | 1 |
| Diameter (inch): | 1-3/8 |
| Diameter (mm): | 35 |
| Capacity - Aluminium, Plastic (mm): | 8 |
| Capacity - Mild Steel (mm): | 3 |
| Capacity - Stainless Steel (mm): | 1.5 |
About this item:
- 35mm Chrome Alloy Screw (Chassis) Punch
- A screw punch, also known as a chassis punch or a knockout punch, is used to punch a hole through sheet metal.
- First drill a pilot hole in the sheet metal the same size as the bolt in the punch.
- For sizes 13mm and under a Twist drill may be used.
- For larger sizes use a Bordo step drill.
- Place the die on to the bolt and then insert this assembly through the pilot hole.
- Wind the punch onto the bolt and tighten by hand until firm.
- Turn hex head of bolt with a socket, spanner or wrench until the punch is drawn completely through the sheet metal.