Share
All Products ➞ Bordo ➞ Screw and Bolt Extractors ➞ Spiral with LH Stub Drill Clam Shell
Size 2 Screw Extractor + LH Stub Drill
| Part Number: | 9900-2W |
| Brand: | Bordo |
| Barcode: | 9326518049098 |
| Pack Qty: | 1+1 |
| For Bolt (inch): | 7/32-1/4 |
| For Bolt (mm): | 5.5-6.5 |
| Pilot Drill (inch): | 7/64 |
| Pilot Drill (mm): | 3 |
| Size: | 2 |
About this item:
- Size 2 Screw Extractor + LH Stub Drill
- Chrome alloy spiral screw extractor.
- Coarse-pitched tapered screw thread.
- Spiral flute screw extractors are ideally suited for removing broken bolts, studs & socket screws from medium to hard metals.
- Typically the required screw extractor will be approx. 2/3 the diameter of the fixing you are extracting.
- Use a centre punch to mark the centre of the fixing before drilling to prevent the drill bit wandering.
- Select a drill bit that is suitable for drilling into the specific material - typically HSS or HSS-Co5. Ideally the drill should be “Left Hand" which will prevent further tightening of the fixing during drilling.
- When using left hand drills ENSURE THE DRILL IS SET TO REVERSE.
- Drill pilot hole in centre of broken bolt, screw or stud.
- Lightly tap screw extractor into hole and turn anti-clockwise with a tap wrench or spanner.
- Damaged bolt, screw or stud will unwind out of the hole.
- Avoid excessive lateral loads - breakage could result.
- Wear eye and hearing protection.