Share
All Products ➞ Bordo ➞ Screw and Bolt Extractors ➞ Square Clam Shell
Size 5 Square Screw Extractor - Clam
| Part Number: | 9904-5 |
| Brand: | Bordo |
| Barcode: | 9326518171850 |
| Pack Qty: | 1 |
| For Bolt (mm): | 14.0-20.0 |
| Pilot Drill (inch): | 3/8 |
| Pilot Drill (mm): | 9 |
| Size: | 5 |
About this item:
- Size 5 Square Screw Extractor - Clam
- Chrome Molybdenum square screw extractor.
- Square screw extractors feature four sided sharp undercut edges to provide a solid grip and will not expand damaged fastener during extraction.
- They are ideally suited for removing broken bolts, studs & socket screws from medium to hard metals.
- Typically the required screw extractor will be approx. 2/3 the diameter of the fixing you are extracting.
- Use a centre punch to mark the centre of the fixing before drilling to prevent the drill bit wandering.
- Select a drill bit that is suitable for drilling into the specific material - typically HSS or HSS-Co5. Ideally the drill should be “Left Hand" which will prevent further tightening of the fixing during drilling.
- When using left hand drills ENSURE THE DRILL IS SET TO REVERSE.
- Drill pilot hole in centre of broken bolt, screw or stud.
- Lightly tap screw extractor into hole and turn anti-clockwise with a tap wrench or spanner.
- Damaged bolt, screw or stud will unwind out of the hole.
- Avoid excessive lateral loads - breakage could result.
- Wear eye and hearing protection.