Share
All Products ➞ Goliath Threading Tools ➞ Taps Hand & Machine ➞ HSS-Co5 Long Series DIN Taps ➞ HSS-Co5 Long Series Reduced Shank Metric Coarse
18 x 2.5 MC DIN 376 HSS-Co5 Tap Set - Goliath
| Part Number: | C47ED4376 |
| Brand: | Goliath |
| Barcode: | 9349009006592 |
| Pack Qty: | 1 |
| Diameter (mm): | 18 |
| Drill Diameter (mm): | 15.5 |
| Lead: | Set |
| Overall Length (mm): | 125 |
| Pitch (mm): | 2.5 |
| Shank (mm): | 14 |
| Tolerance: | 6H |
| # Flutes: | 4 |
| Standard: | DIN 376 |
| Thread Form: | Metric Coarse |
About this item:
- 18 x 2.5 MC DIN 376 HSS-Co5 Tap Set - Goliath
- HSS-Co Bright Finish Reduced Shank Metric Coarse Hand and Machine Tap Set.
- HSS Cobalt Long Series Tap made to DIN 376 standard.
- Reduced shank taps have a smaller shank diameter than full-diameter taps.
- Reduced shank taps are designed for through hole applications in materials with high tensile strength.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
- Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
- Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.
- Manufactured from HSS-Co5.