Share
All Products ➞ Goliath Threading Tools ➞ Taps Hand & Machine ➞ HSS Straight Flute Short Machine and Hand Taps ➞ PG
PG 11 Bottoming HSS Tap - Goliath
| Part Number: | PG11B |
| Brand: | Goliath |
| Barcode: | 9349009031358 |
| Pack Qty: | 1 |
| Diameter (inch): | PG11 |
| Drill Diameter (mm): | 17.7 |
| Lead: | Bottoming |
| Overall Length (mm): | 112 |
| Pitch (tpi): | 18 |
| TPI: | 18 |
| Tolerance: | DIN |
| # Flutes: | 4 |
| Standard: | DIN 40430 |
| Thread Form: | PG |
About this item:
- PG 11 Bottoming HSS Tap - Goliath
- HSS Bright Finish PG Hand and Machine Bottoming Tap.
- HSS Straight Flute Short Machine and Hand Taps.
- These general purpose taps are ideal for creating new threads in a wide variety of materials.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.Panzerrohr-Gewinde thread form was developed in Germany for joining electrical conduit and cable glands.
- Because the conduit walls are thin, obtaining a satisfactory thread depth was a problem.
- For this reason the PG thread form has a thread angle of 80°.
- The number shown as part of the size identification for the PG thread form denotes the maximum cable diameter in millimetres that can be passed through the conduit.
- Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
- Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.
- Manufactured from HSS this general purpose tap is designed for use in medium tensile materials and is for hand or general machine use.