Share
Link:
Copy Link | Email Link
5 Piece 3/8" Head Burr Set - Saber
| Part Number: | 8020-S1 |
| Brand: | Saber |
| Barcode: | 9326518161981 |
| Shank (inch): | 1/4" |
| Number of Pieces: | 5 |
| Material: | Tungsten Carbide |
Components:
| Part Number | Quantity | |
|---|
| 8020-SB3 | 1 | |
| 8020-SC3 | 1 | |
| 8020-SC5 | 1 | |
| 8020-SF3 | 1 | |
| 8020-SF5 | 1 | |
About this item:
- 5 Piece 3/8" Head Burr Set - Saber
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
