Share
All Products ➞ Saber ➞ HSS TiN Coated Jobber Drills ➞ HSS TiN Coated Fractional Clam Shell
Saber 1/8" Hang Sell TiN Coated M2-HSS Jobber Drill 2 Pack
| Part Number: | 8011-1/8S |
| Brand: | Saber |
| Barcode: | 9326518112976 |
| Pack Qty: | 2 |
| Feed per revolution mm: | 0.07 |
| Spindle Speed Aluminium/Brass RPM: | 6129 |
| Spindle Speed Cast Iron RPM: | 2411 |
| Spindle Speed Free Cutting Steel RPM: | 4320 |
| Spindle Speed Malleable Iron RPM: | 2713 |
| Spindle Speed Med. Carbon Steel RPM: | 3014 |
| Spindle Speed Stainless Steel RPM: | 1206 |
| Spindle Speed Tool Steel RPM: | 1809 |
| Spindle Speed Wood/Plastic RPM: | 9143 |
| Diameter (inch): | 1/8 |
| Diameter (mm): | 3.17 |
| Flute Length (mm): | 41 |
| Overall Length (mm): | 70 |
About this item:
- Saber 1/8" Hang Sell TiN Coated M2-HSS Twist Drill 2 Pack
- ANSI B94-11
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Gold Finish TiN Coating (Titanium Nitride) helps to dissipate heat and reduces friction and cold welding.
- The coating higher speed and feed rates can be achieved and tool life is greatly increased.
- The TiN coating is achieved by Physical Vapour Deposition (PVD).
- As with all surface coated tools, performance will deteriorate after resharpening.